Avalon Control Board for A1566 A1366 A1346 A1446 A1466 – Original Replacement

Avalon Control Board for A1566 A1366 A1346 A1446 A1466 – Original ReplacementAvalon Control Board Original Canaan Replacement for AvalonMiner A1346 A1366 A1446 A1466 A1566 Miners The Avalon Control Board is the original Canaan replacement motherboard for the AvalonMiner A1346, A1366, A1446, A1466 and A1566 BTC miners. Drop in fix when the original control board fails restores normal miner operation and clears the persistent boot, network and hashboard detection faults that prevent the unit from producing hashrate. Important

Avalon Control Board | Original Canaan Replacement for AvalonMiner A1346 / A1366 / A1446 / A1466 / A1566 Miners

The Avalon Control Board is the original Canaan replacement motherboard for the AvalonMiner A1346, A1366, A1446, A1466 and A1566 BTC miners. Drop-in fix when the original control board fails — restores normal miner operation and clears the persistent boot, network and hashboard-detection faults that prevent the unit from producing hashrate.

Important compatibility note: the control boards across the five models are physically identical hardware but require different firmware versions. The board ships ready for the model variant you select at checkout — verify the firmware matches your miner's serial number before powering on. Wrong firmware won't damage the hardware but will leave the miner unable to communicate with its hashboards.

When to Replace the Avalon Control Board

• Miner doesn't get an IP address on the LAN — Ethernet PHY or boot stage on the controller failed.
• Backstage / web UI unreachable with confirmed network link — CPU or storage on the control board hung.
• Hashboards not detected in the dashboard while confirmed healthy on a test fixture — I²C / SPI bus failure on the controller.
• Miner stuck in boot loop — LEDs cycle but OS doesn't come up.
• Visible damage on the original board — burn marks, swollen capacitors, surge damage to the network or fan port.

Avalon Control Board Specifications

FAQ — Avalon Control Board

Q: Can I move a control board from an A1366 to an A1466 just by re-flashing firmware?
A: Yes — the hardware is identical. Flashing the correct model-specific firmware migrates the board between models. Useful for repair shops keeping a single SKU on the shelf to cover the whole 13xx / 14xx / 15xx range.

Q: How do I diagnose whether it's the control board or a hashboard issue?
A: If all hashboards report missing simultaneously, it's almost certainly the controller (I²C / SPI bus fault). If a single board is missing while others work, run that board on a test fixture to confirm — single-board failures point to the board itself.

Q: Does this board cover the older Avalon 1066 / 1126 / 1166 / 1246 / 1266 series?
A: No — those earlier generations use a different control board family. See the dedicated listing for A1066–A1266 controllers.

Q: Bulk pricing for repair shops?
A: Yes — email [email protected] with your typical monthly volume and we'll send tier pricing.

Related products

• Avalon 1066pro / 1166pro / 1246 / 1266 Control Board
• Avalon Test Fixture Data Cable 2×7 14P 60cm
• Avalon A320X Multifunction Hashboard Test Fixture – LCD
• Avalon 1446 / 1466 / 1566 Power Cord – C20 / PDU

Repair shops stocking Avalon control boards by the case? Email [email protected] for bulk pricing and firmware bundles. Worldwide shipping from our Shenzhen warehouse.