APEX EC-7 | 18" x 9.5" ET35 | 5x120mm | 72.56mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. FOR WHEEL FITMENT GUIDE https: apexwheels. com fitment
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
ModelEC-7 Wheel QuantitySold Individually Wheel Diameter18" Wheel Width9.5" OffsetET35 Bolt Pattern5x120mm Centre Bore72.56mm Load Rating1,550lbs Weight21.7lbs (9.84kg) Face ProfileProfile 2; medium concavity Wheel ConstructionFlow Formed
A FITMENT FOR YOU
Need help selecting the proper wheel fitment for your BMW? APEX Race Parts have tirelessly test-fitted hundreds of setup combinations in order to provide direct-fit, spacer-free wheel packages for everything from showroom-fresh cars to all-out race builds. Their detailed fitment guides help you avoid costly trial-and-error and walk you through every step of finding your perfect setup.
The right solution for every application
An optimized car setup begins with the perfect wheel and tyre fitment. Without model-specific attention to each wheels specifications, maximum performance is compromised. Each size was selected to find the right balance between a clean fit and the most grip possible. The EC-7’s wide range of widths, diameters, offsets and face profiles result in unique fitments ranging from 8.5" to 10.5" wide. Each wheel combines these features to meet the different brake caliper, strut, and fender clearance needs of each BMW model. Most vehicle models have options for wheels that range from direct-fit to aggressive for specialty applications.
Face Profile One design, many levels of beauty
The EC-7 wheel is available in three increasingly-concave face profiles; The shallowest face provides increased caliper clearance on narrow applications, while the deepest concave face reduces weight and creates a stunningly aggressive appearance on low offset and wide-width applications.
Spokes More than just a pretty face
The curved spokes of the EC-7 serve many purposes, both in terms of form and function. The split "Y" spokes were carefully evaluated from every aspect to ensure light weight and remarkable strength. Their curved design increases brake calipers in almost every application, allowing the EC-7 to fit where the ARC-8 design simply cannot. The unique curvature of each face profile reduces centre pad material as they are optimally selected for each unique width and offset. The lack of a deep front lip and spokes that connect directly to the barrel's lip, producing a rigid wheel with even load distribution.
Brake Clearance A lot of room in a tight space
Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the EC-7 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. APEX 2D modelled most Big Brake Kits available in Solidworks and tweaked the wheel design of the EC-7 prior to production in order to fit as many kits as possible.
Hub Centre Easy to access lugs
Race wheels can't just be light, they need to function in a high performance environment. Unlike the narrow lug recesses of most other wheels, the EC-7 wheel features a wide open hub centre that easily accommodates oversized race lugs and beefy impact sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.
Hub Centric No rings or adapters here
All APEX EC-7 wheels are purpose built for select vehicle applications, and hub locating rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm centre bore.
Centre Cap A factory fit and finish
APEX don't reuse one cap design for all of their wheels. Every EC-7 wheel is designed to work with factory centre caps. You can easily replace APEX centre caps with OEM roundels for a clean factory look. The EC-7 wheels will ship with the APEX Gloss Black centre cap that mimics the size and shape of a BMW factory centre cap.
Wheel Hardware Original or Aftermarket, it all works
The EC-7 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The EC-7 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
TPMS Sensors They all fit
TPMS sensors, which monitor tyre pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the EC-7 wheel doesn't end with centre caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
THE APEX STANDARD
Flow Forming Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminium into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and they have the proof to back it up.
Japan’s JWL is a commonly followed standard for wheel load ratings. The APEX flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy.
Weight & Strength Optimization It’s all in the details
Various design features were implemented to ensure that the EC-7 wheel design was light, but had even more strength to handle the abuses experienced in endurance racing. APEX began with a beefy, multi-spoke, one-piece design. They then added reliefs in the mounting pad to remove weight between lug holes, where they could safely save weight. The design was then run through Finite Element Analysis (FEA) to further optimize the spoke and barrel design. The result is a lightweight wheel with extra strength in all the right places. Use the EC-7 with confidence. It’s over built for both street and track.
Finishes Because being faster is just not enough
The EC-7 wheel is available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the EC-7 leaves lug holes, centre bores and mounting pads untouched, which ensures proper fit and torque values.
Lifetime Warranty A wheel you can depend on
As of recent, all APEX wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. Please contact us for the full terms and conditions.
I’m a 70 lbs Goldendoodle (supposed to be 65, don’t ask) and I love cheese. Real cheese. Sharp cheddar with sourdough bread is my dream, but apparently I’m “on a health journey,” so my people bought me this instead.
Does this bone actually taste like cheese? No. I am not fooled.
Do I still enjoy chewing it loudly while my humans are trying to watch TV? Absolutely yes.
This bone satisfies my need to chew and my emotional desire for cheese-adjacent activities. It keeps me busy, saves the furniture, and lets me crunch dramatically during important dialogue scenes. The yellow color is nice — very cheese-coded — although some cheeses are white, so just something to consider for future versions.
Also, good news: it doesn’t smell like cheese at all, which my humans seem very grateful for. Apparently they don’t want the carpet to smell like a deli. Weird.
Final verdict:
Not cheese.
Still enjoyable.
Would chew again.
~Barley
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 4, 2026
D
Verified Purchase
Dez F.
Houston, US
★★★★★ 5
A Humorous Twist on Tough Dog Toys!
Size: Large, Color: Lobster 3 Pack
I recently purchased the Nylabone Power Chew Dog Toy Pack for Aggressive Chewers from Amazon, and I must say, these toys have been a hilarious hit with my furry friend. As a dog parent of a strong and determined chewer, finding toys that can withstand their chewing prowess is a top priority, and these toys deliver both durability and a touch of humor.
The pack consists of three large/giant-sized toys in the shape of a lobster, cheese, and broccoli. The unique and amusing design puts a smile on my face every time I see my dog interacting with them. The unexpected twist brings a playful element to our daily playtime sessions, making it a fun and engaging experience for both of us.
When it comes to durability, these toys excel. My dog can be quite aggressive with their chewing, and I've struggled to find toys that can withstand their powerful jaws. However, the Nylabone Power Chew toys have proven to be impressively tough and durable. Despite rigorous chew sessions, these toys have remained intact, with no signs of wear or damage. They provide a reliable outlet for my dog's chewing instincts without the risk of shredding or ingesting any harmful materials.
The textured surfaces of these toys add an extra layer of interest for my dog. The ridges and raised bumps provide sensory stimulation, promoting healthy oral hygiene and helping to clean teeth and gums as they chew. I appreciate the added dental benefits these toys offer, as it helps maintain my dog's dental health while they engage in play.
I also appreciate the size options available in this pack. Large and giant-sized dogs often require bigger toys to accommodate their larger mouths and chewing strength. The included toys are appropriately sized for larger breeds, ensuring a comfortable grip and maximum enjoyment during play sessions.
As a bonus, these toys are made from high-quality, non-toxic materials, so I have peace of mind knowing that my dog can safely interact with them. Safety is a top priority for me, and Nylabone consistently delivers in that regard.
In conclusion, if you have an aggressive chewer and are in search of durable, funny, and engaging dog toys, the Nylabone Power Chew Dog Toy Pack is a fantastic choice. These toys provide hours of entertaining play, withstand even the most determined chewers, and offer dental benefits. Embrace the humorous twist and enjoy watching your furry friend engage in safe and engaging play with these fantastic toys.
Invest in the Nylabone Power Chew Dog Toy Pack today and let the lobsters, cheese, and broccoli bring laughter and durability to your dog's playtime!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 19, 2023
My new baby shark.... I mean puppy really enjoys chewing. I can't just give her a ton of pig ears or bully sticks all day, which she would definitely love, so I'm constantly looking for well made chew toys. I'd put this right up with Kong. Very durable and nice. I also love the different textures, she seems to also love it. She can gnaw at the top and chew on the stem. She wanted it as soon as I opened it - it does smell like bacon but I haven't taken a chomp at it to be able to write a complete review!
My dog is about 23 lbs but I can see a 80 lb dog chew this, it's not small.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 8, 2025
N
Verified Purchase
Nunya B
Port Orchard, US
★★★★★ 4
So cute
Size: Large, Color: Pumpkin
My French Bulldogs have really strong jaws and are aggressive chewers. These really are sturdy and last a good amount of time. They are a bit heavy and awkward for my dogs to hold onto but they do like them.
,
and
Promo Codes Available: