Pay in installments of $104.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Diode Dynamics SS3 Max Type MS Kit ABL - White SAE FogFeatures Advanced TIR optics provide high efficiency and focus SAE compliant road legal output Includes round bezel, for factory style appearance Plug and play, no modification needed Durable powdercoated aluminum extrusion Engineered and Assembled in USA Overview Overview. Upgrade your fog lights with our SS3 Type MS Fog Light Bracket Kit! Featuring higher output intensity than any other 3in light on the market, these LED pods have been designed for
Features Advanced TIR optics provide high efficiency and focus SAE-compliant road-legal output Includes round bezel, for factory-style appearance Plug and play, no modification needed Durable powdercoated aluminum extrusion Engineered and Assembled in USA Overview Overview. Upgrade your fog lights with our SS3 Type MS Fog Light Bracket Kit! Featuring higher output intensity than any other 3in light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the included round bezel, the SS3 Fog Kit has a clean, factory-style appearance, only much brighter! Plug and Play. Thanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed on your vehicle in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included with the kit, allowing you to connect the lights to your factory bulb sockets - no additional wiring needed! Backlight Functionality. The Stage Series 3in LED Pod is now available with a distinctive backlight, in a brilliant amber color. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. SAE Compliant. When installed as a pair and aimed in accordance with your state's regulations the Driving White pattern meets SAE J581 standard as a Driving/Auxiliary High Beam Light and the Fog pattern meets SAE J583 standard as a Foglamp for legal on-road use.
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2026 | Jeep | Wrangler | Rubicon |
| 2023-2024,2026 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2026 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2026 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2026 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2026 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2026 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Light and easy to move around! Still sturdy and tall like I wanted.
Color: Grey, Size: 2 Large Panels
Easily put together, work excellently for a room divider and taller than I am at 5'9" so that makes the privacy really great for our purposes. The feet turn and so you can get them out of a pathway as needed, the middle one that has two posts in it does not move but the end ones do. Very LIGHT so not hard to move around. Fabric is not see through. We have a lamp on one side and you can see the light through it but that is not an issue for us. The price is right!! most cubicle kinds of walls are so, so, so much money. With these being light and still give privacy the price was great. If you want them for sound, this is not the product for you but really most cubicle calls are not going to give you privacy other than visually anyway and these do that well. The size was accurate and so fit exactly how I needed them to and that was an important point for me. I used both of them in L shapes for my room and the size was right on.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2025
★★★★★ 5
Almost perfect
Color: Black, Size: 2 Large Panels, Color: Black, Size: 2 Large Panels
The cloth material is sturdy and fits well on the design. Both sides are black and you can't tell a difference between each side. It's extremely light weight and easily movable. We got a double and a single and the single is used as a sliding door. It's definitely not the MOST stable thing but overall it's pretty stable, probably won't work GREAT on carpet. It's not see through at all, which is great, the only downfall is the gap between the two sides. We are using a blanket to cover the gap. It's not 6 foot tall, but you can adjust the feet on it to be taller. Overall it's a great product for the price and can easily be moved out of they way.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 5, 2024
★★★★★ 5
A decent buy
Color: Black, Size: 1 Large Panel
Easy to assemble, good quality fabric, the two horizontal "feet" are supposed to be stabilized by a knob/screw but its always looosening up with even the slightest move, so the only unfortunate thig is that it requires constant turning to tighten it if you adjust its location even a teensy bit. I used it as a backdrop to hold a design of balloons, then since the party I use it as a "semi" partition in a bedroom. Good value for the money since it can be used over and over.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 24, 2025
★★★★★ 4
Inexpensive Solution For Privacy
Color: Grey, Size: 2 Large Panels, Color: Grey, Size: 2 Large Panels
This worked for my needs to get privacy on a second-floor patio that faced neighbors about 16 feet away, and was almost exactly the width and height I need, and was looking for. As the patio was about 12 feet in width.
The fabric is thin, but not see-through, and works well enough for my specific privacy needs.
It wasn't that sturdy, even with the three legs, the top would kind of bend a bit from the weight of the thing, but I knew this from previous comments on reviews, and opted to use C-clamps and some screws to tighten it to the wall so that isn't an issue since I was outside and had walls to be able to screw into. You may have to try something different if using inside.
I gave four stars instead of five as the instructions past Step 3 really don't make much sense for Steps 4 and 5 where the two are connected and when legs are put on, but I was able to work through it eventually. They really need to break down the steps for installing the legs with better illustrations.
Also, highly recommend having two people work on it or at least having a second person on standby for certain steps just due to the size of them once they are together or for connecting the dividers together in the end.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 10, 2025