SKU: 5530655385

Power Conditioner, Voltage Regulator, & Battery Backup UPS For Cepheid GeneXpert Infinity

Sale price$3617.99 Regular price$4019.99
Save 10%

Pay in installments of $1005.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 17 - Jul 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Power Conditioner, Voltage Regulator, & Battery Backup UPS For Cepheid GeneXpert InfinityThis system is designed to provide voltage regulation, surge suppression, and automatic emergency backup power specifically for the Cepheid GeneXpert Infinity. Software Loaded For Specific Instrument Operation The UPS is loaded with software settings that limit the voltage fluctuations to within the range specified within the instrument site preparation guide. Hardware Configuration For Specific Instrument Operation The UPS internal bypass wire is

This system is designed to provide voltage regulation, surge suppression, and automatic emergency backup power specifically for the Cepheid GeneXpert Infinity

Software Loaded For Specific Instrument Operation - The UPS is loaded with software settings that limit the voltage fluctuations to within the range specified within the instrument site preparation guide. 

Hardware Configuration For Specific Instrument Operation - The UPS internal bypass wire is removed which prevents voltages outside the acceptable operating range specified in the site preparation guide of the instrument to be passed through to the instrument. 

  • Cuts Utility/Electric Costs compared to other battery backup UPS systems.

  • Slashes Setup/Installation Costs by requiring only a single receptacle for the UPS to be plugged into for power. If you don't already have the required receptacle, it can be installed by an electrician in advance of receiving the UPS and typically costs a fraction of the cost that it would cost to normally hardwire the UPS into an electrical panel.   

  • Reduces Setup Time as the system arrives on a mini pallet with ramp included, rolls off the pallet, plugs into your wall receptacle, has a single switch/breaker on the back, and an ON button on the front LCD. The pre-installed dual voltage output PDU (power distribution unit) has all of the most used receptacles in North America so equipment can simply be plugged in. Unpacking, setup, and power up can be done within 5-10 minutes with only a Phillips screwdriver to unscrew the pallet blocks.  

  • Eliminates Down Time as short duration power outages, voltage inconsistencies, surges, and other power issues are isolated away from any equipment you attach to the output receptacles. 

  • Prolongs Equipment Life as built in circuit protection and voltage regulation ensure only the correct operating voltage is provided to the instrument at all times. Our factory configures this variation of the battery backup UPS in power conditioning mode so the unit will NOT ever switch to bypass mode which would potentially expose the attached equipment to the power problems and improper voltages. 

  • Multiple Device Support as up to 6,000 VA of power consumption can be handled by the UPS. The output PDU has multiple receptacles and 2 simultaneous voltage outputs that match each receptacle type.  

  • Plug And Play Functionality, rolls off the pallet ready to plug in and turn on.
  • INPUT: NEMA L6-30P (Plug)
    • 208, 220, 230, or 240 Volts Single Phase, 30 Amp Breaker
  • OUTPUT: 
    • 8x NEMA 5-15/20R (Receptacles, 115 Volts)
      *Fits Either NEMA 5-15P (Plug) Or NEMA 5-20P (Plug)
    • 1x NEMA L5-30R (Receptacle, Twist Lock, 115 Volts)
      *Fits NEMA L5-30P (Plug, Twist Lock)
    • 2x NEMA L6-15R (Receptacle, Twist Lock, 230 Volts)
      *Fits NEMA L6-15P (Plug, Twist Lock)
    • 1x NEMA L6-20R (Receptacle, Twist Lock, 230 Volts)
      *Fits NEMA L6-20P (Plug, Twist Lock)
    • 4x NEMA 6-15/20R (Receptacles, 230 Volts)
      *Fits Either NEMA 6-15P (Plug) Or NEMA 6-20P (Plug)
    • 1x NEMA L6-30R (Receptacle, Twist Lock, 230 Volts)
      *Fits NEMA L6-30P (Plug, Twist Lock)

    User Guides:
    -Battery Backup Power 6KVA-10KVA 1.0 PF Advanced Digital Tower UPS User Guide
    -
    Battery Backup Power SNMP Card Full User Guide.pdf

    Spec Sheet/Cut Sheet:
    -BBP 4.5-10KVA 1.0 PF Advanced Digital Tower Specification Sheet.pdf

    Complete 5 Tier Power Protection System – Surge Protection, Real Time Power Conditioning With Voltage Regulation, Heavy Duty Isolation Transformer, Pure Sine Wave Output, & Always On Double Conversion Backup Power Technology.

    Extreme Energy Savings - Saves up to $1,892.16 per year over older model 6 KVA UPS systems in annual electricity costs due to energy efficiency enhancements.

    Multiple Backup Time Options:

    Model Number: Description (Under Battery Options Drop Down): Approximate Backup Time At Full Load:
    BBP-ADV-6K-L630P-115230PDU-GXINFINITY UPS With Internal Batteries Only (20 Batteries, 12 Volts, 9 Amp Hours Each) 2.16 KWH 15 Minutes
    BBP-ADV-6K-L630P-115230PDU-WEBPWC-GXINFINITY UPS Plus 1 Extra External Battery Pack (80 Batteries, 12 Volts, 9 Amp Hours Each) 8.64 KWH 1 Hour 0 Minutes
    BBP-ADV-6K-L630P-115230PDU-W2EBPWC-GXINFINITY UPS Plus 2 Extra External Battery Packs (140 Batteries, 12 Volts, 9 Amp Hours Each) 15.12 KWH 1 Hour 45 Minutes
    BBP-ADV-6K-L630P-115230PDU-W3EBPWC-GXINFINITY UPS Plus 3 Extra External Battery Packs (200 Batteries, 12 Volts, 9 Amp Hours Each) 21.60 KWH 2 Hours 31 Minutes
    BBP-ADV-6K-L630P-115230PDU-W4EBPWC-GXINFINITY UPS Plus 4 Extra External Battery Packs (260 Batteries, 12 Volts, 9 Amp Hours Each) 28.08 KWH 3 Hours 16 Minutes
    BBP-ADV-6K-L630P-115230PDU-W5EBPWC-GXINFINITY UPS Plus 5 Extra External Battery Packs (320 Batteries, 12 Volts, 9 Amp Hours Each) 34.56 KWH

    4 Hours 1 Minutes

     *Note: The 6 kVA model now has 9 amp hour batteries installed instead pf the standard 7 amp hour batteries. This increases battery capacity and backup time by approximately 22%.

    • 6000 VA (6 kVA) / 6,000 Watt (6 kW)
    • N+1 And Parallel Operation Up To 24 kVA (4 Units In Series)
    • Energy Efficient/High Efficiency UPS Mode
    • LCD Status Measurements Include Voltage, Frequency, Load Level, Battery Level, Output Current, and Estimated Remaining Backup Time
    • Tower With Casters
    • Pure Sine Wave Clean Output To Operate And Maximize The Life Of Even The Most Sensitive Electronics
    • Online (Double Conversion) - Highest Level Of Protection Available - Battery Power Always Engaged, No Switching Delay (Phase Locked To Input Power Source)
    • Wide Frequency Input Range (44-66 Hz Auto Sensing) Allows For Generator Power To Be Used As A Primary Or Secondary Input Power Source (Using Automatic Transfer Switch Before UPS)
    • Constant Voltage Regulation (±1%)
    • Constant Frequency Regulation (±1 or ±3% Selectable)
    • Factory Warranty: 3 Years On Electronics And 1 Year Warranty On Batteries
    • Optional Extended Warranty: 5 Years On Electronics And 1 Year Warranty On Batteries
    • Digital Signal Processing (DSP) Allows For Greater Reliability Over Older UPS Designs And Superior Electric Noise Filtration
    • >0.99 Input Power Factor / 1.0 Output Power Factor (Line Mode) / High Efficiency Mode For Superior Efficiency And Power Savings
      • UPS Weight (Excluding Optional External Battery Packs): 264 lbs.
      • Dimensions (Inches): 9.5 X 26 X 20 (W x H x D)
      • Operating Temperature: 32°-104° F
      • Operating Humidity: 20%~95%, Non-Condensing
      • Operating Elevation: 3,280 Feet Without De-Rating 
      • Cold Start Capable (Shipped With Cold Start Disabled, Will Enable Automatically After Receiving Power For The First Time After Shipping)
      • cTUVus, cULus, and FCC Certified
      • Includes Software For Windows Monitoring & Configuration 

       Replacement Batteries:
      -Leoch DJW12-9.0 (Lead Acid), Leoch LP12-9.0 (Lead Acid), Betta Batteries 6-HCNFJ-7.2 (Lead Crystal), Or Battery Backup Power BBP-LIFEPO4-HDR-12V-7.2AH (Lithium Iron Phosphate) 

      Do you need a PDF quote or a custom emergency backup solution? Email us at [email protected]

       

      Shipping Notes
      • Free Standard Shipping on $100+ Orders to the USA.
      • Except Preorder products are shipped in 48 hours.
      • Delivery to the USA:
      1. Standard Shipping : 3-10 business days
      • If time is of the essence, please consider selecting expedited delivery for faster service.
      Exchange/Return Notes
      • We offer a 30-day return/exchange service after receiving.
      • Final sale items are not eligible for returns or exchanges.
      • To process your return/exchange, please contact us at [email protected]
      • Please click here for more details>>> Return & Exchange Policy
      SKU: 5530655385

      Discover Niche Categories That Outsell

      Top-Converting Item to Boost Your Average Order

      4.6 ★★★★★
      Based on 19 reviews
      Sort
      Highest Rating
      Newest First
      Oldest First
      Product Reviews
      W
      Verified Purchase
      Walter Beck
      Lake Worth, US
      ★★★★★ 5
      Very warm, adjustable fit
      Nice fit, just used on snowmobile in Wisconsin
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on February 18, 2026
      J
      Verified Purchase
      Jrc
      Lexington, US
      ★★★★★ 1
      Protectores de manubrio para bicicleta
      Se les mete el agua no son buenos
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on April 29, 2026
      D
      Dominic
      Louisville, US
      ★★★★★ 3
      They're okay, but they're quite bulky.
      I liked the design and overall application of these, but they don't fit my needs. They definitely work well at protecting my hands from freezing weather, but they are way too bulky for regular motorcycle use. In my opinion, I feel that these would be much more suited for a snowmobile or ATV. If you treat them as what they’re mostly designed for — ATV/snow-related riding or cold-weather utilitarian use — these gloves are a solid buy. They deliver warmth, weather protection, and decent control through the TPU windows. But if you put them on a fast street motorcycle or expect “motorcycle-glove” levels of control and feel — they’ll likely disappoint or even pose safety trade-offs. In that context, lighter and more control-oriented gloves would probably serve you better. The reason I'm docking stars is because they're marketed toward motorcycle users, and they;re very impractical. The durability seems pretty good, as I've taken them out and even had a couple of rocks/road debris hit the TPU windows with no scratches or punctures. They're not super comfortable to use at highway speeds, especially since they fit so loose, and they tend to press my front brake/clutch which is very dangerous. I personally cannot recommend this product for motorcycle use, unless you already have handguards, which will probably negate the need for these at all. Invest in some good heated gloves and/or heated grips, and I think you'll be much safer and better off in the end. For the price, I think this is a good value, but they're just not for me.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on December 11, 2025
      B
      Verified Purchase
      Bob Cremer
      Port Orchard, US
      ★★★★★ 5
      All ATV owners need these.
      These gloves are fabulous. Anybody having fun on a ATV need these. With my hand warmer and these gloves, I don’t wear anything else on my hands. They are great.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on October 30, 2025
      C
      Verified Purchase
      Chuck
      Lake Worth, US
      ★★★★★ 2
      handlebar mittens
      Too big. If using during snow plowing they are a burden due to need to take hands off controls, and shift from forward to reverse. Might be okay if just riding around on trails, etc.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on December 8, 2025

      recommand products