Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Holley Diecast In-Tank RetroFit Fuel Module Returnless System 12-159450 LPH Drop In Retrofit EFI Fuel System w Hydramat Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13. 5 Volts 16. 9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Are you interested in an EFI retrofit kit, but just can't get past the complication of the fuel system? Holley is proud to introduce their Universal In Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley
450 LPH Drop-In Retrofit EFI Fuel System w/Hydramat Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline.
Are you interested in an EFI retrofit kit, but just can't get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes.
NOTES: It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation. *** Maximum 6AN line and fitting size due to space limitations between unit and fuel tank.
Features:
- The easiest way to convert your vehicle to an in-tank, EFI fuel system
- Installs in any fuel tank from 7? to 12? deep to fit a wide variety of applications
- The low profile 5 inch diameter design is only 1.275 inch thick above the tank mounting surface for added clearance when needed
- The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit
- The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride
- Includes innovative Holley Hydramat to ensure consistent fuel supply. The 3? x 15? HydraMat mounting flange has 6 clocking pin locations to allow for 360 degree adjustment to clear sending unit levels or any tank floor restrictions
- Die cast aluminum construction for corrosion resistance and long lasting good looks
- ?? NPT ports for a wide variety of plumbing options
- Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI or any TBI of EFI conversion
- Optional roll over valve available
- Two different fuel pumps are available to match your requirements - 255LPH or 450LPH for both return and returnless style systems
Specs:
| Application | Universal |
|---|---|
| Average Current Draw | 16.9Ampere |
| Average Flow Rating | 450Liters per Hour |
| Brand | Holley |
| Clearance Category | Air and Fuel Delivery |
| Connector Color | Black |
| Connector Gender | Male |
| Connector Quantity | 1 |
| Discount Percentage | 26-50% |
| Emission Code | 5 |
| Finish | Black |
| Free Flow LPH | 450 |
| Fuel Filter Included | Yes |
| Fuel Sending Unit Included | No |
| Fuel Tank Pressure Sensor Included | No |
| Fuel Type | E85, Gasoline |
| Gasket Or Seal Included | Yes |
| Gasket Or Seal Material | Foam |
| Grade Type | Performance |
| Height | Adjustable |
| Housing Material | Aluminum |
| In Tank or External | In Tank |
| Inlet Fitting Thread Size | 1/4Inch |
| Inlet Quantity | One |
| Inlet Size | 1/4 inch NPT |
| Inlet Type | NPT |
| Internal Or External Strainer | External |
| Lock Ring Included | No |
| Material | Die Cast Aluminum |
| Maximum Pressure | 60Pounds per Square Inch |
| Minimum Fuel Tank Depth | 7 inches |
| Mounting Hardware Included | Yes |
| Negative Ground | Yes |
| NPT Thread | 1/4 NPT |
| Outlet Fitting Thread Size | 1/4Inch |
| Outlet Quantity | One |
| Outlet Size | 1/4 inch NPT |
| Outlet Type | NPT |
| Product Type | Fuel Pump Module |
| Pump Type | Electric |
| Regulator Included | No |
| Sale Category | Air and Fuel Delivery |
| Top Mount Diameter | 5Inch |
| Universal Or Specific Fit | Universal |
| Voltage | 12Volts DC |
| Warning | California Proposition 65 |
| Warranty | Limited 90 Day |
| Wire Harness Included | Yes |
| Wire Quantity | 2 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 521 reviews
Sort
Product Reviews
★★★★★ 5
Great look and storage space
I've had these shelves for two years now, and still love them. I love the industrial style. They add lots of great storage space for a small apartment. I have two sets - one for the laundry room and the other as a linen closet. Assembly is okay. Make sure you follow the instructions.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2026
★★★★★ 5
Great product
Great product. All items included in package. Easy to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Obsessed! Quality! Style!
The easiest assembly ever! Solid, stylish. You would not regret ordering this item.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 28, 2023
★★★★★ 4
Pleased. Looks nice and set up well.
Looks nice and is a unique look to put mementos, small book, and photos. Pretty solid when tightened up properly. Shelves have a cheap veneer to them but you can’t tell until you touch it.
It is very secure if you attach this to a stud. I did not drill to the floor and it is fine. Wall anchors suck in drywall and this is big enough you should be attaching to one stud minimum.
Here is A little trick to secure the shelving unit properly if the studs don’t work in your favor. Take a pine 1x3 or 1x4 and cut to the width of the shelving. Paint them the same color as the wall. You will barely notice the board. Place the assembled shelve amd mark where the pipe anchors attach on the wall. Use those marks to place the boards and drill them directly to studs. Mount the pipe feet anchors to the board. See picture. Solid!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 29, 2022
★★★★★ 5
Would bug again.
I bought this product for my daughters room to put her Legos on. The support poles are actually metal every bit of them. I can see where people were disappointed with the shelves but this one’s I got we’re not bad. I didn’t expect for 120 bucks solid wood shelves. The quality was good I was happy with my purchase. I turned them upside down and attached to the ceiling so it made assembly a little tricky. I like the results. The instructions are like six pictures for the whole thing, very hard to figure out especially when you are turning it upside down.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2022
recommand products
Knipex 10" SmartGrip Pliers - Auto Adjusting
88.30
Knipex Precision Electronics Diagonal Cutters Round Head - MultiGrip
100.98
Knipex Precision Tweezers w/ Centering Pin angled tips black lacquered
20.08
Knipex ESD Precision Tweezers round tips 2 mm wide
27.95
Crank Brothers Stamp 1 Large platform pedals, red
49.99