SKU: 41183992906

Slash 7 Lava

$1349.55 $1499.50
Save 10%
No.2 Bestseller on leroyalkraft.com >

Pay in installments of $374.88 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 19 - Jul 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Slash 7 LavaDas Slash 7 ist eine erschwingliche All Mountain Rakete, mit der sich jeder Singletrail mit atemberaubendem Speed shredden lsst. Dank krftigem Aluminiumrahmen und leistungsfhigem Fahrwerk rauscht dieses Bike gnadenlos brachiale, ruppige Abfahrten souvern herunter. Ausstattung: Rahmen: Alpha Platinum Aluminium, internes Staufach, konisches Steuerrohr, Knock Block 2. 0, interne Control Freak Zugfhrung, Unterrohrschutz, Shuttle Guard, Gewindetretlager,

Das Slash 7 ist eine erschwingliche All-Mountain-Rakete, mit der sich jeder Singletrail mit atemberaubendem Speed shredden lässt. Dank kräftigem Aluminiumrahmen und leistungsfähigem Fahrwerk rauscht dieses Bike gnadenlos brachiale, ruppige Abfahrten souverän herunter.

Ausstattung:

Rahmen: Alpha Platinum Aluminium, internes Staufach, konisches Steuerrohr, Knock Block 2.0, interne Control Freak-Zugführung, Unterrohrschutz, Shuttle-Guard, Gewindetretlager, ISCG 05, 34,9-mm-Sitzrohr, Magnesiumumlenkhebel, Mino Link, ABP, Boost148, 160 mm Federweg
Gabel: RockShox Yari RC, DebonAir-Feder, Motion Control RC-Dämpfung, konischer Gabelschaft, 42 mm Vorbiegung, Boost110, 15 mm Maxle Stealth-Achse, 170 mm Federweg
Dämpfer: RockShox Deluxe Select+ RT, 230 x 62,5 mm
Max. kompatibler Gabelfederweg 180 mm (596 mm Achse bis Gabelkrone)
VR-Nabe: Bontrager, Aluminium, gedichtetes Lager, Aluminiumachse, 6-Loch-Scheibenaufnahme, Boost110, 15-mm-Steckachse
HR-Nabe: Bontrager, Aluminium, gedichtetes Lager, 6-Loch-Scheibenaufnahme, Rapid Drive 108, Shimano MicroSpline-Freilaufnabe, Boost148, 12 mm Steckachse
HR-Schnellspanner: Bontrager Switch-Steckachse, abnehmbarer Hebel
Felge: Bontrager Line Comp 30, Tubeless Ready, 28-Loch, Presta-Ventil
Reifen: Bontrager XR5 Team Issue, Tubeless Ready, Aramidwulstkern, 120 TPI, 29 x 2.50
Max. Reifengröße Rahmen: 29 x 2.50
Schalthebel: Shimano SLX M7100, 12fach
Schaltwerk: Shimano XT M8100, langer Käfig
Kassette: Shimano Deore M6100, 10-51 Z., 12fach
Kette: Shimano Deore M6100
Max. Kettenblattgröße: Max.: 34 Zähne, min. 28 Zähne
Sattel: Bontrager Arvada, Streben aus CrMo-Rohr, 138 mm Breite
Sattelstütze: TranzX JD-YSI-22PLQ, 100 mm Hub, interne Zugführung, 34,9 mm, 346 mm Länge (S)
Sattelstütze: TranzX JD-YSI-22PLQ, 150 mm Hub, interne Zugführung, 34,9 mm, 454 mm Länge (M/ML)
Sattelstütze: TranzX JD-YSI-22PLQ, 170 mm Hub, interne Zugführung, 34,9 mm, 497 mm Länge (L/XL)
Lenker: Bontrager Line, Aluminium, 35 mm, 27,5 mm Rise, 820 mm Breite
Griffe: Bontrager XR Trail Elite, Nylonklemme
Vorbau: Bontrager Elite, 35 mm, 0 Grad, 35 mm Länge
Max. Bremsscheibendurchmesser hinten: 203 mm
Gewicht: M - 15,50 kg / 34,18 lbs
Max. Gewicht: Dieses Fahrrad hat eine maximale Gewichtsbeschränkung (Fahrrad, Fahrer und Beladung) von 136 kg.

* In seltenen Fällen liefern unsere Hersteller Fahrräder mit geänderten, aber gleichwertigen Komponenten.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 41183992906

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 17 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
Kim R-A
Dallas, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Fort Morgan, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Waukegan, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
C
Verified Purchase
Colauhu
Los Angeles, US
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
G
Verified Purchase
Gigi
Chelsea, US
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020

recommand products

1+1 GRATIS | GlowHaven™ | Solar Lichterkette für Garten, Terrasse & Balkon
29.95
Premium Textil-Leinwand Luskentyre Beach, Schafportrait
99.99
GuardianGlow™ | Solarbetriebene Wespenfalle mit LED-Anlockung
34.95
Premium Textil-Leinwand Ein Motiv aus dem Kalender Astronaut - Unterwegs in der Galaxie
99.99
Premium Textil-Leinwand Ja, Schwimmen ist großartig
39.99